CNC加工はどのような製品に選ばれますか?

金属 CNC 加工はハードウェア加工の一般的な方法です. CNC (数値制御工作機械) コンピュータ数値制御の略称です (コンピュータ数値制御), プログラムによって制御される自動工作機械の一種です。. CNC加工はどのような製品に選ばれますか?
簡単な例を挙げてみましょう: シャーシパネル (厚さは一般的に以上です 5 厚い以上), この場合はレーザーカットによる加工は行いません. その理由は次のとおりです: ワークの厚みが開口できる程度に達したとき, より明白なセクションが残ります, 内面研削作業は非常に難しい部分です. したがって, このような製品はCNCで直接加工する方が適切です。.

What parts are suitable for metal CNC machining?

1. Irregularly shaped parts

It is also known as irregularly shaped parts. These parts are usually less rigid and require a mixture of points, surfaces, lines and other bits of processing. Deformation and accuracy of irregular parts are very difficult to ensure, so the general general machine tool is difficult to complete the processing. Need to use CNC machining to carry out.

2. disk, set, plate parts

Distribution of holes on the surface system, with keyways, radial holes and curved shaft parts. These parts cannot be processed by general machine tools. Curved parts require CNC vertical machining centers, and parts with apertures require CNC horizontal machining centers.

3. Housing parts

This type of parts generally with hole system, parts inside the cavity, length, width and height have a certain ratio. Most of the applications in the automotive, medical equipment and aircraft manufacturing and other fields. These parts have relatively high requirements for machining. Usually after milling, drilling, expanding, boring, reaming, countersinking, tapping and other processes, almost all the processes have to go one time. Ordinary machine tool processing time-consuming and can not guarantee the machining accuracy. したがって, these parts are generally use CNC machining centers for processing.