Metal 3D Printing Parts Material Introduction

What are the metal materials suitable for 3D printing?

Metal 3D printing parts are becoming increasingly widespread in life and industry. However most people don’t know which metals can used for 3D printing. Vì thế, SUN-YEE TECH gives a brief introduction to it.

Stainless Steel 3D Printing:

Đặc trưng: Stainless steel is widely used for its resistance to corrosion by weak corrosive media such as air, steam, water and chemically aggressive media such as acid, alkali and salt.
Ứng dụng: items with complex shapes and high strength requirements. Large-sized items with simple shapes.

Aluminum 3D Printing

Characteristics: High strength, mật độ thấp
Ứng dụng: complex parts, thermally conductive and dissipative parts, aerospace, vân vân. Large-sized items with simple shapes.

Titanium Alloy 3D Printing

Đặc trưng: light weight, high strength, good toughness, corrosion resistance.
Ứng dụng: complex, fine pieces, vân vân. Low-budget, common shaped items.

Maraging Steel 3D Printing

Characteristics: Die steel is the steel use to make cold punching dies, hot forging dies, die casting dies and other molds. It is characterized by high hardness, wear resistance, high hardenability and high thermal fatigue resistance.
Suitable for use: modeling complex molds, can combine with traditional molds. Large size model with simple shape.

Material parameters:

Our equipment can support stainless steel, mantle alloy, hợp kim nhôm, bạc sterling, drill chrome alloy, nickel-based high-temperature alloys copper alloy and other metal powder materials rapid prototyping, according to the user’s different needs, để cung cấp dịch vụ sản phẩm tùy chỉnh

Material type	Name	Characterization
		Particle size	Morphology	Flowability	Loose density	Density	Tensile strength	Yield strength
stainless steels	316L	15~53μm	Sphericity	40S	3.9g/cm3	≥99%	≥560MPa	≥480MPa
	17-4PH(GP1)	15~53μm	Sphericity	40S	3.9g/cm3	≥99%	≥850MPa	≥530MPa
	15-5PH(PH1)	15~53μm	Sphericity	40S	3.9g/cm3	≥99%	≥850MPa	≥530MPa
Maraging Steel	MS1	15~53μm	Sphericity	40S	4.3g/cm3	≥99%	≥1090MPa	≥1000MPa
	4Cr5MSiV1	15~53μm	Sphericity	40S	4.3g/cm3	≥99%	≥1150MPa	≥1070MPa
Hợp kim titan	TC4	15~53μm	Sphericity	45S	2.5g/cm3	≥99%	≥600MPa	≥540MPa
Hợp kim nhôm	ALSi10Mg	15~53μm	Sphericity	150S	1.45g/cm3	≥95%	≥330MPa	≥245MPa